DHD350 / COP54 Blue Color Dth Hammer For Dimensional Stone Industry
Products Description
DHD350/COP54 DTH products and down the hole drills are designed to drill holes in hard rock, overburden, or loose strata formations in many different types of drilling applications. These markets are commonly found in the construction, oil & gas, mining, quarry, geothermal, water well, horizontal and other rock drilling industries. Operators of DTH products drill holes from a few feet to 1000’s of feet deep. In fact, one of the deepest holes on record was drilled to 17,600 feet (5364 m) below the surface.
Advantage
The piston and wear sleeve components have been re-designed to increase airflow efficiency at lower air volumes for the hammer cycle. This modification has resulted in air consumption dropping to 962 SCFM (26.5 m3/min) at 350 PSI (24.1 Bar) while increasing penetration rates and further improving productivity and performance. Thus, smaller compressors rated less than 1,000 SCFM that are common on many drill rigs, may now be utilized with the A Series DTH hammers to reach the hammers’ peak performance.
Technical Data:
| Length (less bit) | Weight(less bit) | External diameter | Bit shank | Hole range | Connection thread |
| 1214mm | 76.50kg | ∅125mm | cop54 DHD350 | ∅135-∅155 | API 2 3/8"Reg API 3 1/2"Reg |
| Working Pressure | Impact rate at 0.5 Mpa | Recommended rotation speed | Air consumption |
| 1.0Mpa | 1.8Mpa | 2.4Mpa |
| 1.0-2.5Mpa | 25HZ | 25-35r/min | 9 m³/min | 15m³/min | 23 m³/min |
Main Features
1. Fewer internal parts, simple structure and heat-treated parts leads to less failure and easier maintainance.
2. More efficient energy transfer
3. Faster drilling speed
4. Lower air consumption
5. Lower oil consumption
Application
It is mainly used in dimensional stone industry.
Product Tags:
|
|
DHD350 / COP54 Blue Color Dth Hammer For Dimensional Stone Industry Images
|
